Freud
3 Piece Picture Frame /Molding Set
with Introduction To Making Molding / Picture Frames DVD and Profiles Guide
|
This Freud
3 Piece Picture Frame Set makes hundreds of profiles by mixing the 3 bits and varying the cutting heights of the bits during the production of the molding.
1/2" Shank
|
 Face Molding Bit #1-
This bit cuts a large portion of your molding and is usually made in 2-3 passes. Typically the frame molding bit is the first bit that is used to cut your material. To achieve different profiles the bit can be moved up and down which will change the placement of the bead. |
Cove & Bead Groove Bit -
Produce beautiful decorative grooves and edge detail in picture frame molding with these bits. |
 V Groove Bit -
The V groove is used to add accents to moldings. The V groove is usually placed on a flat area to add a small profile that will continue around your frame. The depth can be changed by lowering or raising the bit in order to change the significance of the profile.
|
| No. |
Description
|
Price |
Quantity |
|
Freud 3pc Picture Frame / Molding Set
with DVD and Profile Guide
|
$159.99
|
|
|
Freud
4 Piece Picture Frame /Molding Set
with Introduction To Making Molding / Picture Frames DVD and Profiles Guide
|
This Freud
4 Piece Picture Frame / Molding Set makes thousands of profiles by mixing the 4 bits and varying the cutting heights of the bits during the production of the molding.
1/2" Shank
|
Face Molding Bit #1-
This bit cuts a large portion of your molding and is usually made in 2-3 passes. Typically the frame molding bit is the first bit that is used to cut your material. To achieve different profiles the bit can be moved up and down which will change the placement of the bead. |
Cove & Bead Groove Bit -
Produce beautiful decorative grooves and edge detail in picture frame molding with these bits. |
V Groove Bit -
The V groove is used to add accents to moldings. The V groove is usually placed on a flat area to add a small profile that will continue around your frame. The depth can be changed by lowering or raising the bit in order to change the significance of the profile.
|
 Face Molding Bit -#2
This bit cuts a large portion of your molding and is usually made in 2-3 passes. Typically the face molding bit is the first bit that is used to cut your material and is often paired with the Face Molding Bit -99-015. To achieve different profiles the bit can be moved up and down which will change the placement of the bead. |
| No. |
Description
|
Price |
Quantity |
|
Freud 4 pc Picture Frame / Molding Set
with DVD and Profile Guide
|
$209.99
|
|
|
Freud
6 Piece Picture Frame /Molding Set
with Introduction To Making Molding / Picture Frames DVD and Profiles Guide
|
With this Freud
6 Piece Picture Frame / Molding Set profile possibilities are virtually endless, by mixing the 6 bits and varying the cutting heights of the bits during the production of the molding.
1/2" Shank |
Face Molding Bit -#1
This bit cuts a large portion of your molding and is usually made in 2-3 passes. Typically the frame molding bit is the first bit that is used to cut your material. To achieve different profiles the bit can be moved up and down which will change the placement of the bead. |
Cove & Bead Groove Bit -
Produce beautiful decorative grooves and edge detail in picture frame molding with these bits. |
V Groove Bit -
The V groove is used to add accents to moldings. The V groove is usually placed on a flat area to add a small profile that will continue around your frame. The depth can be changed by lowering or raising the bit in order to change the significance of the profile.
|
Face Molding Bit -#2
This bit cuts a large portion of your molding and is usually made in 2-3 passes. Typically the face molding bit is the first bit that is used to cut your material and is often paired with the Face Molding Bits -#1 and #2. To achieve different profiles the bit can be moved up and down which will change the placement of the bead. |
 Ogee Bit-
This standard ogee groove bit accents any profile with a slight, decorative groove and it can produce a decorative edge when used with an edge guide. |
 Face Molding Bit -#3
This bit cuts a large portion of your molding and is usually made in 2-3 passes. Typically the face molding bit is the first bit that is used to cut your material and is often paired with the Face Molding Bit #1 and or Face Molding Bit #2. To achieve different profiles the bit can be moved up and down which will change the placement of the bead.
| No. |
Description
|
Price |
Quantity |
|
Freud 6 pc Picture Frame / Molding Set
with DVD and Profile Guide
|
$309.99
|
|
|
